Tsebo ea tlhaho

Tsebo ea tlhaho

Melao ea ho lekanya - Mokhoa oa ho metha lifensetere hantle

Litaelo tsa ho kenya - Litaelo tse hlalosang mokhoa oa ho lekana le ho kenya

Lihlahisoa tsa Lifense li fumaneha - Libopeho tse ngata tse fapaneng tsa skrini lia fumaneha

Tšoanela Tumelo - Bakeng sa li-sunscreens tsa SOLASOLV le li-blind roller tsa ROLASOLV

Litlhaloso tsa ho hloekisa filimi / Fabric  (Bitsoa ho PDF)

WithOUT SOLASOLV® Film Protection the diagram above shows how an enclosed area is heated by the short wave energy from the sun passing through glass windows. This short wave energy is absorbed by the room surfaces and is re-radiated from them as long wave radiation, generating heat in the process.

Hobane khalase e hlakileng ha e lumelle hore mahlaseli ana a malelele a maqhubu a fetele ho eona ho ea sepakapakeng, mocheso o koaletsoe ka hare ho sebaka se koetsoeng.

WITH SOLASOLV® Film Protection the diagram above shows how the rejection of solar energy takes place with very little conversion to heat. The transmitted energy is only converted to heat when it strikes an absorbing surface.

Mocheso o nang le mocheso o ka khalase, libaka tse potolohileng le polasetiki li arolelitsoe moeeng le moea o ka ntle 'me karolo e' ngoe e khutlisetsoa moeeng.

The dyed layers of polyester film which make up the finished film type, control the amount of visible light which the film transmits. This feature produces the ‘Anti-Glare’ effectiveness of the films and the colour shading observed when looking through them.


Matla a kopantsoeng le% ea matla a letsatsi a hlotsoang lihlahisoa tsa moriti li tla fapana ho latela maemo a sebakeng se lekaneng. Liteko tse ka holimo e ne e le tsa sistimi ea mahala e lekantsoeng le 15mm ea letsatsi e tsoang khalase e teteaneng ea 6mm

POLYESTER e sebelisoang lifilimi tsa moriti ke filimi ea polyethylene terephthalate e nang le biaxially oriented.

Mocheso o behiloeng ha o ntse o sebetsa, o na le ntlha e nyenyane ea hoo e ka bang. 260 ° C (500 ° F) mme ha e theohe ka tlasa 150 ° C.


Litlhaloso tsa Mekhoa ea Boenjiniere ea Letsatsi

Ho Fokotsa Glare (Tsela ea Anti Glare) - Phokotso ea liperesente tsa leseli le bonahalang.

Kakaretso ea matla a motlakase a matla a letsatsi (Reflective Effect) - Palo ea matla ohle a letsatsi a hanoang ke sistimi ea glazing.

Ultraviolet Light Rejected - Palo ea khanya eohle ea mahlaseli a kotsi e ananeloang ke sistimi ea glazing.

Kakaretso ea Ts'oaetso ea letsatsi - Palo ea matla ohle a letsatsi a tsamaeang ka kotloloho ka sistimi ea glazing.

Kakaretso ea Khoeli ea Letsatsi - Bophahamo ba matla ohle a letsatsi a bonahatsoang ka kotloloho ke sistimi ea glazing.

Kakaretso ea 'Mele oa Letsatsi - Palo ea matla ohle a letsatsi a keneloang hanghang ke sistimi ea glazing.

Tlhaloso ea Leseli e bonahalang - Palo ea leseli le bonahalang le tsamaeang ka kotloloho ka sistimi ea glazing.

Shading Coefficient - Tekanyo ea bongata ba matla a letsatsi a lumelloang ka sistimi ea glazing. Ha e le tlase, matla a fokolang a feta 'me ho ntlafatsa moriti.